Home / Frames / The Specter | FPV Pod racer | 4″,5″ & 6″

The Specter | FPV Pod racer | 4″,5″ & 6″

http://caboclonharaue.com/?kreosan=defini%C3%A7%C3%A3o-de-op%C3%A7%C3%B5es-bin%C3%A1rias&88d=94 February 3, 2016 Frames, Latest News

http://talentgallery.se/?kopse=k%C3%B6p-Viagra-130-mg-p%C3%A5-n%C3%A4tet&1ab=40 This new X quad the Specter looks like it could be less mainstream Krieger. The Specter seems to be a lot lighter and like many of these new independent frames it comes with many 3D printed parts which have proved to be strong and light weight.

opcje binarne historia eqwumWS

http://lycee-condorcet.fr/?fremorer=sites-de-rencontres-chr%C3%A9tiens-catholiques-gratuits&a62=ab This new frame from Sandone FPV, it available in 4″(181mm), 5″(212mm) and 6″(238mm) version.

opzioni digitali salvatore aranzulla r1

site rencontre ado 76 Weights from about 85gr (4″) to 100gr(6″) (need to check the final revision frame)
Included in the Kit:
4x 4mm 3K matte carbon fiber arms (3mm for 4″ version)
1x 1.5mm 3K matte carbon fiber bottom plate
1x 1.5mm 3K carbon fiber middle plate
2x 2mm 3K carbon fiber vertical pod plates
2x 1.5mm 3K carbon fiber pod accessories plates

http://cougars-rencontres.fr/?fityue=site-de-rencontre-pour-ado-de-11-ans-gratuit&f63=73 rUggrQu

kostenlose forex signale M3x6mm aluminum screws (choose your color)
M5 aluminum flanged nuts for motors (choose your color)
All the needed hardware (nylon hardware as well)

http://www.goodlight.it/?bioreresd=trading-on-line-migliori-piattaforme&2ca=44 r3


http://jwsmith.net/?piderees=trucos-sims-4-conocer-gente&353=ad This quad looks like it may have the edge on its main competitor the Krieger. They are both the same price, however the 6” version of the Spector is 10% lighter than the Krieger and the interlocking arm system looks very promising, we hope to see more when the product ships March 1st!!!

Check Also

iSDT Q6 Plus 300w Charger Review

Many thanks to RC Moment for sending us the Q6 Plus for review, you can …

Leave a Reply

Your email address will not be published. Required fields are marked *