Home / Tag Archives: Electronics

Tag Archives: Electronics

August, 2017

  • 16 August

    Emax RS2306 2400kV Motor Review

    Thanks to gearbest for sending us the Emax Rs2306 2400kV motors for review, you can purchase them here. Initial Impressions: The RS2306 were boxed as just any other Emax motor was. We opted for the lower 2400kV variants, this was because the motors were destined for our Helix, which uses …

  • 10 August

    FrSky release M9-R Hall Effect Gimbals

    Despite releasing the M9 gimbals only a few months ago, FrSky have decided to release an upgraded Hall Effect gimbal called the M9-R. Compared to the regular M9 gimbals, they seem to be almost identical when it comes to almost everything. The only differences we can see is the red …

July, 2017

  • 10 July

    FrSky M9 Gimbals Review

    Since the beginning of FPV, the Taranis has been the go to radio for almost everyone. The cheap price does come with drawbacks though, its gimbals are low quality and others have described it as “cheap feeling”. Thanks to Banggood for sending us the M9 gimbals for review, you can …

June, 2017

  • 5 June

    AKK CA20 600tvl CCD Camera Review

    Thanks to AKK Technology for providing the CA20 for review, you can purchase the camera here. This is our first AKK product that we have reviewed that is not a video transmitter, but will it keep up the high bar of standard and quality and performance that the video transmitters have set. …

  • 5 June

    AKK K31P 600mw 40 Channel Video Transmitter Review

    Thanks to AKK Technology for providing the K31P for review, you can purchase the video transmitter here. And once again, we have another product from AKK, and once again you may be asking yourself, whats different and special about this one. Compared to the other AKK VTX’s we have reviewed, …

May, 2017

  • 1 May

    Top 5 FPV Antennas 5.8Ghz May 2017

    Pagoda The pagoda was designed by Maarten Baert to offer the compromise between the best performance, ease of manufacture and durability. It’s fair to say he achieved all of these in the pagoda. His design is simple, yet effective. As the parts of the antenna are on PCB, the accuracy …

April, 2017

  • 30 April

    Anet A8 3D Printer Review: The best cheap 3d printer?

    Thanks to GearBest for sending us this printer for review, you can purchase the Anet A8 here The Anet A8 is a very cheap 3d printer available for under $160, making it one of the cheapest 3d printers available on the market today. Initial Impressions The printer was well protected …

  • 6 April

    BLHeli_32

    What is BLHeli_32? A new firmware has recently been announced that will compete with the likes of the KISS series and Gemfan Maverick ESCs. BLHeli_32 is a new firmware for 32 bit ESCs that has been written by Steffen, one of the main contributors for the original BLHeli and BLHeli_S …

  • 4 April

    ProDrone Pagoda 5.8 Antenna Review

    This is a guest article by Franczesko FPV I recently got some Pagoda antennas from ProDrone for testing. As you can later see in the video, they came packed very nice – relatively big cardboard box (only two antennas inside) full of bubble wrap, and short instruction about how NOT to use …

  • 4 April

    Emax Bullet ESC Review

    Thanks to GearBest for sending us these ESCs for review, you can purchase them here. After witnessing the success of other BLHeli S ESC such as the DYS XS30 Amps and cicada ESCs. Emax set out to replicate their trade mark formula of the last year: make the best, the fastest …