Home / Frames / MXP200B Racing Quadcopter – Bapu Edition

MXP200B Racing Quadcopter – Bapu Edition

MXP were looking to make a dedicated racing frame and they created the MXP200B! They aim to be lightweight and strong and with AUW: 270g including all electronics(Not including GoPro or Battery), it certain seems that (at least on paper) they achieved this. They go on to say that the frame is easy to build while also protecting the electronics inside.

IMG_7030_1024x1024
The Frame was designed with help from the racing pilot ‘Bapu’ (yes we think it sounds like Charpu too). This is what MXP say ‘We worked side by side with some of the world’s top racers, including Bapu himself, to construct a frame designated respectively for racing and reaching high levels of top speed. Its true X design gives you the opportunity to achieve top speeds and enjoy racing!’

IMG_7035_1024x1024

Specs:

  • 1x Xhover 1.5mm Carbon Fiber Top Plate (with Xhover logo printed on plate)
  • 1x Xhover 3mm Carbon Fiber Main Uni-Body Plate
  • 2x 26mm 1.5mm Carbon Fiber Plates for FPV Camera mount r
  • 1x Xhover PDB 36mm board (Nylon Mounting hardware is included)
  • 1x XT60 PigTail
  • 4x Black 35mm Aluminum Standoffs
  • 1x set of Black High Quality Steel hardware
  • 1x Neoprene Tape for HD Cam
  • 1x Xhover LiPo Strap
  • 4x Xhover ESC Tape

Recomended parts:

 

Check Also

AKK K31P 600mw 40 Channel Video Transmitter Review

Thanks to AKK Technology for providing the K31P for review, you can purchase the video …

2 comments

  1. very wonderful Quadcopter. thank you all the best.

  2. This is Awesome article and Great tips.Thank You So Much.I Like It.

Leave a Reply

Your email address will not be published. Required fields are marked *